[CA] [CA11] Which Evo for Simrad RPU300 hydraulic pump - Printable Version +- Raymarine forum (http://forum.raymarine.com) +-- Forum: Raymarine Forums (/forumdisplay.php?fid=1) +--- Forum: Autopilots (/forumdisplay.php?fid=23) +--- Thread: [CA] [CA11] Which Evo for Simrad RPU300 hydraulic pump (/showthread.php?tid=6771) |
[CA11] Which Evo for Simrad RPU300 hydraulic pump - Timmacdonald - 10-13-18 06:48 PM I currently have a Simrad autopilot that I’d like to upgrade to Raymarine but keep the existing pump. I can’t determine from the charts whether I need an ACu-300 or 400. The RPU300 stats are: Hydraulic Ram Capacity: 17.7-58.5cu.in. (290-960cc) Maximum Pressure: 60 BAR Dimensions: 9 1/16"L x 3 15/16"W x 4 13/16"H Amperage: 3.5-10A @ 24V RE: [CA11] Which Evo for Simrad RPU300 hydraulic pump - Chuck - Raymarine - Moderator - 10-16-18 12:52 PM Welcome to the Raymarine Forum Tim, While it is possible that the ACU-400 may be used with the specified third party drive unit, I will need to know the capacity of the vessel's steering ram in order to properly advise. RE: [CA11] Which Evo for Simrad RPU300 hydraulic pump - Timmacdonald - 11-04-18 11:47 AM Hi, The steering arm is a Macron MC 80x9 which appears to have 21.15 Cu in displacement. Is that the spec you need? I've attached the spec sheet. Thanks! Tim RE: [CA11] Which Evo for Simrad RPU300 hydraulic pump - Chuck - Raymarine - Moderator - 11-05-18 09:07 AM Tim, Given the capacity of the steering ram an ACU-400 would be required for the Evolution autopilot system. |