+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [DG] [DG] Migrate from E80 to e127 (/showthread.php?tid=6821)
[DG] Migrate from E80 to e127 - [email protected] - 10-23-18 07:17 PM
I am moving from an E80 MFD to an e127 MFD and find the connectors (i.e. power) to be different. Is there an adapter or do I need to replace the existing connector?
RE: [DG] Migrate from E80 to e127 - Derek - Raymarine - Moderator - 10-24-18 07:00 AM
Hi Jim,
The power cable connector is different and there is no adapter, so the new power cable supplied with the e127 will need to be used.
Also bear in mind the e80 communicated with the rest of the navigation instruments through SeaTalk, whereas the e127 operates on STng, so you may well need an E22158 adapter to be able to interface the pre-existing SeaTalk network to the new STng network that the e127 operates on.
Thanks
Derek