+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Autopilots (/forumdisplay.php?fid=23)
+--- Thread: [CA] [CA11] Ev100 (/showthread.php?tid=6903)
[CA11] Ev100 - bwconquest21 - 11-09-18 05:57 PM
Just received my autopilot and stumped out of the box. With regard to the ACU-100 and the Seatalk ng screw terminal next to the rudder terminal am I to understand, I have to cut one of the sealed plug connections off the black and blue backbone Seatalk ng cable and lay bare the five wires within the backbone cable so I can individually attach each wire to the screws at the Seatalk ng five screw terminal?
RE: [CA11] Ev100 - Chuck - Raymarine - Moderator - 11-13-18 12:39 PM
Welcome to the Raymarine Forum bwconquest21,
Negative. Per Chapter 4.3: ACU-100, ACU-150 connections of the Evolution EV-1 and ACU Installation Instructions, the ACU connects to the SeaTalkng® backbone using the supplied Spur cable, not a Backbone cable. A Stripped End Spur Cable is provided within the kit to accommodate this end. As shown within the diagram below, this Spur cable will be connected to a spur socket (white) within a T-Piece of 5-Way Connector within the backbone.
RE: [CA11] Ev100 - bwconquest21 - 11-15-18 08:24 AM
Thank you. I subsequently found the Spur pig tail under the package material.
RE: [CA11] Ev100 - Chuck - Raymarine - Moderator - 11-15-18 11:01 AM
You're welcome.