+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Autopilots (/forumdisplay.php?fid=23)
+--- Thread: ST-STng wiring: power and p70 connections (/showthread.php?tid=698)
ST-STng wiring: power and p70 connections - bufflehead - 04-29-16 02:17 PM
I am installing an EV-100 (on the dining room table at the moment, but later in a boat).
1) It would be convenient to wire the red power supply line to the ST-STng converter hub and let it supply power through the bus to the other components. I have a 1m backbone cable between the ST-STng converter hub and STng hub. The rest of the ng network is as supplied with the EV-100.
Is this OK?
2) Can I plug the p70 into one one of the white sockets on the ST-STng converter or does it have to be plugged into the STng hub?
Again, it simplifies my wiring if I can do this.
Thx. Don.
RE: ST-STng wiring: power and p70 connections - Chuck - Raymarine - Moderator - 04-29-16 02:20 PM
Welcome to the Raymarine Forum Don,
Q1) It would be convenient to wire the red power supply line to the ST-STng converter hub and let it supply power through the bus to the other components. I have a 1m backbone cable between the ST-STng converter hub and STng hub. The rest of the ng network is as supplied with the EV-100.
Is this OK?
A1. Yes.
Q2) Can I plug the p70 into one one of the white sockets on the ST-STng converter or does it have to be plugged into the STng hub?
A2. Yes.