+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: AIS (/forumdisplay.php?fid=22)
+--- Thread: [CA] [CA11] Silent mode on c80 and ais 700 (/showthread.php?tid=6999)
[CA11] Silent mode on c80 and ais 700 - toniocask - 12-03-18 07:27 AM
Hallo,
another question please..sorry..
on my c80 it is possible to switch in silent mode my brand new Ais 700 directly from the Mdf, or I need to add a switch on the positive cable?
Thank you for the reply.
Antonio.
RE: [CA11] Silent mode on c80 and ais 700 - Chuck - Raymarine - Moderator - 12-03-18 09:11 AM
Welcome back to the Raymarine Forum Antonio,
Unfortunately, software switching of Silent Mode was not included within features of C-Series Classic MFD v5.16 software. Accordingly, the AIS700's Silent Mode leads would need to be used to switch the AIS700 into and out of Silent Mode when used with a C-Series Classic MFD.
RE: [CA11] Silent mode on c80 and ais 700 - toniocask - 12-06-18 03:49 PM
Many thanks Chuck,
so for silent mode I have to connect the 2 cables "Silent + e, Silent - " where? Directly to the nmea 183 cable of the mdf? If so, whit the white, brown, green or yellow cable?
Or maybe you was meaning a switch between this 2 cables ? Grazie.
Antonio
RE: [CA11] Silent mode on c80 and ais 700 - Chuck - Raymarine - Moderator - 12-06-18 04:24 PM
Antonio,
The AIS700's Silent leads will be connected to a common marine grade ON-OFF switch. Closing the circuit (ON) will cause the AIS700 to enter Silent Mode. Opening the circuit (OFF) will cause the AIS700 to exit Silent Mode.
RE: [CA11] Silent mode on c80 and ais 700 - toniocask - 12-13-18 04:25 AM
Many thank's
Ciao
Antonio
RE: [CA11] Silent mode on c80 and ais 700 - Chuck - Raymarine - Moderator - 12-13-18 08:36 AM
You're welcome.