+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [CA] [CA11] Axiom networking using wifi (/showthread.php?tid=7129)
[CA11] Axiom networking using wifi - philduff - 12-31-18 03:26 PM
I have seen this thead discussing sharing over wired network.
Is it viable to use 1 or 2 Axiom MFDs as slaves, connected via wifi to a master Axiom MFD, which in turn is connected to the STng network?
Potentially the master MFD could be connected via wired ethernet to a Wifi router/AP, such that the slaves could also connect to the router.
I'm hoping to share charts and data without wired ethernet to the slaves.
Regards
Phil
RE: [CA11] Axiom networking using wifi - Chuck - Raymarine - Moderator - 01-02-19 10:29 AM
Welcome to the Raymarine Forum Phil,
Q. Is it viable to use 1 or 2 Axiom MFDs as slaves, connected via wifi to a master Axiom MFD, which in turn is connected to the STng network?
A. Negative. Raymarine's MFDs featuring an Ethernet communications interface(s) are designed to be interfaced to one another via a wired Ethernet network.