+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Fishfinders (/forumdisplay.php?fid=25)
+--- Thread: [CA] [CA11] adding DSM300 to C80 (/showthread.php?tid=7180)
[CA11] adding DSM300 to C80 - CaptG - 01-09-19 10:56 AM
GOOD MORNING
I have a C80 and I am looking to connect a DSM300. I have a depth/temp. transducer connected to my smart craft gauges Mercruiser part # 888828B2 My question is can I use this transducer for the DSM300 and keep it connected to the smartcraft gauges
thank you
RE: [CA11] adding DSM300 to C80 - Chuck - Raymarine - Moderator - 01-09-19 12:55 PM
Welcome to the Raymarine Forum G,
It is not possible to use the currently installed depth transducer from the SmartCraft system with a DSM300. The DSM300 was designed to be interfaced to the same set of fishfinder transducers which are designed for use with the CP370.
RE: [CA11] adding DSM300 to C80 - CaptG - 01-09-19 03:49 PM
is there a transducer that has temp/depth combined that I can use? and will airmar transducer work with the set up
RE: [CA11] adding DSM300 to C80 - Chuck - Raymarine - Moderator - 01-09-19 04:03 PM
G,
Should you click on the link provided within my initial response, it will open the web page of compatible transducers. There you will see tabs titled "Depth & Temperature" and "Depth, Speed & Temperature". Clicking on those tabs will list the compatible transducers having these features, their part numbers, an specifications. If considering use of an Airmar branded transducer with a DSM300, then it would be recommended that Gemeco, Inc. (Airmar’s US distributor (803 693 0777)) be contacted for information concerning compatible Airmar transducers.
RE: [CA11] adding DSM300 to C80 - CaptG - 01-09-19 04:06 PM
Ok Thank You, Chuck
RE: [CA11] adding DSM300 to C80 - Chuck - Raymarine - Moderator - 01-09-19 04:07 PM
You're welcome.