+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Fishfinders (/forumdisplay.php?fid=25)
+--- Thread: [CA] [CA11] Dragonfly Replacement (/showthread.php?tid=7214)
[CA11] Dragonfly Replacement - Mick - 01-14-19 10:12 AM
I am replacing one of the original Dragonfly models, with a Dragonfly 5 pro. I was hoping to reuse the existing wiring onboard the boat. The transducer and wiring are still in good conditiong.
Does Raymarine make an adapter cable to go from the old plug to the new one?
If not, are the old transducers, compatible with the new Dragonfly units?
RE: [CA11] Dragonfly Replacement - Chuck - Raymarine - Moderator - 01-14-19 02:51 PM
Welcome to the Raymarine Forum Mick,
Please click here to view the Dragonfly power/transducer adapter cables. In this case, the A80332 Adapter Cable would be used to adapt "single keyway" transducers for use with Dragonfly "3-keyway" green or yellow locking collars such as are found within second generation Dragonfly fishfinders..
RE: [CA11] Dragonfly Replacement - Mick - 01-14-19 04:20 PM
Thanks.
RE: [CA11] Dragonfly Replacement - Chuck - Raymarine - Moderator - 01-14-19 06:37 PM
You're welcome.