+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Fishfinders (/forumdisplay.php?fid=25)
+--- Thread: A128 Transducer Question (/showthread.php?tid=726)
Pages: 1 2
RE: A128 Transducer Question - scottor - 05-06-16 03:55 PM
Thank you Chuck for your feedback, have a great weekend.
RE: A128 Transducer Question - Chuck - Raymarine - Moderator - 05-06-16 03:57 PM
You're welcome.
RE: A128 Transducer Question - scottor - 05-07-16 12:04 PM
While searching for a good location in my stern bilge area to install my CPT 120 I realize that it will be in close proximity to my existing Airmar transducer connected to my DSM 300. Is there a distance I should keep between the CPT 120 and the existing Airmar inhull devise?
I am concern about cross talk interference, does the dsm 300 w/ transducer run on a different frequency then the A128 chirp downvision unit?
Thank you, Scott
RE: A128 Transducer Question - Chuck - Raymarine - Moderator - 05-09-16 10:07 AM
Scott,
Raymarine has not specified a minimum installation distance from other transducers. For thru-hulls installed on vessels equipped with twin screws, a transducer is commonly installed on each side of the keel. Interference noise between CHIRP and common 50/200 kHz fishfinder transducers installed on the same vessel is typically quite minimal.