+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Product and Feature Suggestions (/forumdisplay.php?fid=128)
+--- Thread: Dragonfly 7 Pro - Temp Display (/showthread.php?tid=727)
Dragonfly 7 Pro - Temp Display - Ed Y - 05-03-16 01:15 AM
On the Dragonfly 7 Pro, is there any way to display temperature while actively navigating to a waypoint (either in chart or chart/sonar display mode)?
It is often good to look for temp breaks while heading to the fishing grounds to see if we should stop short of the actual target location.
Thanks,
E
RE: Dragonfly 7 Pro - Temp Display - Chuck - Raymarine - Moderator - 05-03-16 08:45 AM
Welcome to the Raymarine Forum Ed,
Unlike Raymarine's a/c/e/eS/gS-Series MFDs, Dragonfly displays are pre-configured with respect to the data items displayed within each page/pane and cannot be re-configured to display user specified data. That said, when operating with the latest available Raymarine product software updates, sea temperature is one of the pre-configured data items displayed within both Chart and Fishfinder application page/panes of Dragonfly displays.
RE: Dragonfly 7 Pro - Temp Display - Ed Y - 05-03-16 11:36 PM
Thanks, Chuck. I can see the temp on all displays EXCEPT when navigating to a waypoint. In that mode, the temp display is replaced by an ETA to the waypoint.
I was wondering if there was any option to get the Temp also displayed. If not, can it entered as feature request. Temp is a key factor in deciding when to drop the lines early on the way to a spot.
RE: Dragonfly 7 Pro - Temp Display - Chuck - Raymarine - Moderator - 05-04-16 08:53 AM
Ed,
Thanks for clarification of the use case. Feature request will be logged accordingly to consider this feature for inclusion within a future Dragonfly software update.
Please click here more information concerning product and feature suggestions.