Raymarine forum
[CA] [CA11] Adding one i70s to a two motor system - Printable Version

+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Instruments (/forumdisplay.php?fid=117)
+--- Thread: [CA] [CA11] Adding one i70s to a two motor system (/showthread.php?tid=7308)



[CA11] Adding one i70s to a two motor system - sr330da - 01-28-19 06:12 PM

EV-150, Axium 9, Ray53, and analog to N2k converter installed on a Seatalk NG network.

I want to replace a existing depth gage with a i70s and I’m wondering how one i70s works with two motors. Can both motors be displayed? (RPM, Fuel level, Voltage, Oil pressure) Is this the two motor overview? Have a example picture?

I know the Axium 9 will show me this information. I want to know what the i70s will do....

thanks


RE: [CA11] Adding one i70s to a two motor system - Chuck - Raymarine - Moderator - 01-29-19 08:56 AM

Welcome back to the Raymarine Forum sr330da,

The i70/i70S MFIDs may indeed display engine data from more than one engine. Configuration settings within these MFIDs and MFDs permit the operator to select the number of engines. Please click here to view a FAQ addressing interfacing engine systems to a SeaTalkng / NMEA 2000 backbone to which Raymarine products have been interfaced.