[CA] [CA11] Axiom DV - Printable Version +- Raymarine forum (http://forum.raymarine.com) +-- Forum: Raymarine Forums (/forumdisplay.php?fid=1) +--- Forum: Fishfinders (/forumdisplay.php?fid=25) +--- Thread: [CA] [CA11] Axiom DV (/showthread.php?tid=7376) |
[CA11] Axiom DV - Gunner - 02-05-19 05:46 PM Hi I purchased an axiom DV last year and would like to upgrade to a RealVision transducer. Is it possible to hook the RV-100 transducer up to the axiom DV? RE: [CA11] Axiom DV - Chuck - Raymarine - Moderator - 02-06-19 09:26 AM Welcome to the Raymarine Forum Gunner, Unfortunately, it is not possible to adapt a RealVision transducer to be interfaced to the Transducer socket of an Axiom DV MFD. However, RealVision sonar features may be added to an Axiom MFD, Axiom DV MFD, Axiom Pro S MFD, or Axiom XL MFD by interfacing the MFD to a RVX1000 High Performance 3D CHIRP Sonar Module which in turn has been interfaced to a RealVision transducer. [CA11] Axiom DV - Gunner - 02-07-19 08:02 PM Chuck thanks for your response, I appreciate your deep knowledge of the raymarine products. Am I correct in assuming that I can upgrade to the CPT100 transducer without any additional equipment upgrades? Thanks again RE: [CA11] Axiom DV - Chuck - Raymarine - Moderator - 02-08-19 08:54 AM Gunnar, It is indeed possible to interface a CPT-100, CPT-100 DVS (successor to the CPT-100), CPT-110, and CPT-120 may all be interfaced to the Transducer socket of an Axiom DV MFD. |