+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Radar (/forumdisplay.php?fid=125)
+--- Thread: [CA] [CA11] how far can i see if I mount my Quantum radar 8 feet above water vs. 9 etc.? (/showthread.php?tid=7382)
[CA11] how far can i see if I mount my Quantum radar 8 feet above water vs. 9 etc.? - ray18 - 02-06-19 11:27 AM
Hi,
how far can i see if I mount my Quantum radar 8 feet above water vs. 9 etc.?
My boat deck is about 1 to 2 feet above water line. I want to mount the radar 6 or 7 feet above my boat deck. How far can my radar see?
Is there a Quantum scan range table by height installed on a boat?
I know the max is 24 nm.
Thanks,
RE: [CA11] how far can i see if I mount my Quantum radar 8 feet above water vs. 9 etc.? - Chuck - Raymarine - Moderator - 02-06-19 11:54 AM
Welcome back to the Raymarine Forum ray18,
Q1. How far can i see if I mount my Quantum radar 8 feet above water vs. 9 etc.?
A1. Please click here to view a FAQ addressing this subject.
Regarding your photo, I wouldn't recommend that anyone consider PVC pipe for a radar tower. It is strongly recommended that a professionally designed / fabricated tower which is constructed from stainless steel and/or aluminum tubing be installed to support radomes or open array pedestals on open hull boats.
RE: [CA11] how far can i see if I mount my Quantum radar 8 feet above water vs. 9 etc.? - ray18 - 02-06-19 12:28 PM
Thanks for the quick reply. Yes, Alluminum arch will be my next step to make sure I get the best results. Coast guard may have issues with my PVC setup too. So, thanks for your quick reply.