+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [CA] [CA11] can LH3 support third party IP camera that is higher than 1080P now? (/showthread.php?tid=7398)
[CA11] can LH3 support third party IP camera that is higher than 1080P now? - ray18 - 02-07-19 08:36 PM
can LH3 now support third party IP camera that is higher than 1080P now?
I have a Axiom MFD would like to buy a 4K camera to connect to Axiom.
> - Network/IP Cameras (ex. Raymarine CAM210, CAM220, CAM200IP, FLIR
> M132/M232 Thermal Cameras (MFDs running LH3 software only ... MFDs
> running LightHouse II software will be able to display video only from
> these thermal cameras), etc.) and video encoders (ex. Axis M70 Series
> Encoders (M7011, M7014, M7016), etc.)
> IP Camera Product Requirements:
> - Must support H.264 video compression
> - Must support RTSP (Real Time Streaming Protocol)
> - Must support ONVIF Service Detection (ONVIF User Authentication MUST
> BE DISABLED)
> - Must have DHCP enabled & Dynamic IP set to ON
> - 720p resolution or 1080P
RE: [CA11] can LH3 support third party IP camera that is higher than 1080P now? - Chuck - Raymarine - Moderator - 02-13-19 01:21 PM
RAY18,
Although one may may use a 4K IP camera with the Axiom MFDs, the Raymarine system will not benefit visually, as it will be viewed in 720P or 1080P.