+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [LW] [LW11] Lighthouse 3.8 Shallow Water Alarm (/showthread.php?tid=7427)
[LW11] Lighthouse 3.8 Shallow Water Alarm - hubesail - 02-11-19 06:32 PM
Hi,
I recently upgraded my two eS127 units to Lighthouse 3.8 software. I love the easy functionality of the new software but cannot find where to set a shallow water alarm with accuracy.
With my old Lighthouse 2 software I used the Fishing - Shallow Arrival alarm, which worked fine. The new 3.8 software has that function BUT I can only set the alarm at 2 ft, 10 ft, 20 ft, or higher.
I need to be able to set it at 1 foot increments from less than 20 ft to be effective. I run in a lot of 8 to 10 ft water and at 2 ft I'm aground.
Can you point me to another way to set a shallow water alarm?
Thanks, Hube
RE: [LW11] Lighthouse 3.8 Shallow Water Alarm - Louise - Raymarine - Moderator - 02-13-19 10:17 AM
Dear hubesail,
Thank you for your query.
This has been seen in house and has been raised as a bug with software team and they are in the process of scheduling a fix for this will be available in upcoming software releases.
Many Thanks
Louise
RE: [LW11] Lighthouse 3.8 Shallow Water Alarm - hubesail - 02-18-19 01:57 PM
Thanks for the feedback. I hope this is in as an urgent safety related fix.
Hube
RE: [LW11] Lighthouse 3.8 Shallow Water Alarm - Louise - Raymarine - Moderator - 02-22-19 08:19 AM
Dear hubesail,
At this time it is scheduled for fixing in Version 3.9.
Many Thanks
Louise