+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [LW] [LW11] Axiom and auto tack (/showthread.php?tid=7445)
[LW11] Axiom and auto tack - Mickeyb - 02-14-19 07:39 AM
I have been looking everywhere, but cannot find out how to do this feature?
Surely it must be there and I am blind or stupid, but I am trying to work out how to get the Axiom to tell my wheel pilot to tack say 90deg port? This will so help single handing....
I have the 9" Axiom and the Raymarine wheel pilot - at latest software version I think.
Many thanks.
Mike
RE: [LW11] Axiom and auto tack - Louise - Raymarine - Moderator - 02-14-19 11:22 AM
Dear Mickeyb,
There is no function on the Axiom for auto-tack or auto-turn in the autopilot menu (the pop out side bar). This needs to be done from the autopilot control head.
What is model is your wheel pilot?
Many Thanks
Louise
RE: [LW11] Axiom and auto tack - Mickeyb - 02-15-19 05:26 AM
(02-14-19 11:22 AM)Louise - Raymarine - Moderator Wrote: Dear Mickeyb,
There is no function on the Axiom for auto-tack or auto-turn in the autopilot menu (the pop out side bar). This needs to be done from the autopilot control head.
What is model is your wheel pilot?
Many Thanks
Louise
Evolution Wheel Pilot, ACU-100. I have no control head - it is directly controlled from the Axiom.
Pity that it cannot happen - please add to the wish list for Axiom which is a superb piece of kit.
Thanks,
Mike
RE: [LW11] Axiom and auto tack - Louise - Raymarine - Moderator - 02-15-19 07:36 AM
Dear Mickeyb,
Thank you for your response and I will put it forward as a feature request with the product manager.
Many Thanks
Louise