+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: e120 classic (/showthread.php?tid=745)
e120 classic - jim35 - 05-04-16 01:28 PM
what would I need to connect a airmar gh2183 gps and heading sensor to my e120. the only other feed would be the radar. thanks , Jim
RE: e120 classic - Chuck - Raymarine - Moderator - 05-04-16 01:57 PM
Welcome to the Raymarine Forum Jim,
It is recommended that the MFD and GH2183 each be interfaced as a spur to a powered and properly terminated SeaTalkng backbone. A simple backbone may be constructed from the following components:
- A06064 SeaTalkng 5-Way Connector
- A06031 SeaTalkng Termination Plugs x 2 ... one each to be installed within the blue backbone sockets of the SeaTalkng 5-Way Connector
- A06049 SeaTalkng Power Cable ... connects to switched 12VDC power circuit and to white spur socket of SeaTalkng 5-Way Connector
- A06061 / 4.92in (1.5m) SeaTalkng to E-Series Classic MFD Adapter ... connects between MFD's SeaTalk2/NMEA 2000 (SeaTalkng) socket and white spur socket of SeaTalkng 5-Way Connector
- A06075 / 39.4in (1.0m) DeviceNet Female to SeaTalkng Spur ... connects between GH2183's cable and white spur socket of SeaTalkng 5-Way Connector
RE: e120 classic - jim35 - 05-05-16 07:48 AM
Chuck , thanks for the info. Parts are on order. If I have a problem i'll let you know . Thanks , Jim
RE: e120 classic - Chuck - Raymarine - Moderator - 05-05-16 09:55 AM
You're welcome.