+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: After softwware update (/showthread.php?tid=7471)
After softwware update - Copefishin - 02-18-19 12:09 AM
I have 4 axiom 9 mfd. (2) at the console and (2) at the bow. I have one as the master and two of the units networked to it -
After the latest 3.8.97- I had to do a factory reset because the unit wouldn’t recognize transducer. After getting that figured out. I’m not able to read the water temp at the master unit. I’m getting -.-
Second issue- one that I hadn’t noticed before. I’m losing bottom on plane at higher speeds. Trolling speeds are ok most of the time. I have a p-72 and rv-100.
Do I need to assign where to get the water temp from ? Data source? Reinstall software?
Thanks in advance