+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [CA] [CA11] Axiom 9 wiring (/showthread.php?tid=7535)
[CA11] Axiom 9 wiring - SVBREILA - 02-27-19 01:42 AM
I’ve searched the e manual for the Axiom, but I cannot find what kind of cable connects to the power pigtail to connect to the backbone.
M
RE: [CA11] Axiom 9 wiring - Chuck - Raymarine - Moderator - 02-27-19 03:47 PM
Welcome to the Raymarine Forum SVBREILA,
An A06045 / 15.7in (0.4m) SeaTalkng Spur to DeviceNet (F) would be used for this purpose if not additional cable length is required. Please click here to view a FAQ addressing other options should a longer spur need to be created. Please additionally pay notice to the maximum spur length specified within the FAQ which I had previously referenced.
RE: [CA11] Axiom 9 wiring - SVBREILA - 02-27-19 07:46 PM
Thanks Chuck,
I did find it about 30 mins after I posted. Does this only come in the short length?
M
RE: [CA11] Axiom 9 wiring - Chuck - Raymarine - Moderator - 02-28-19 09:28 AM
SVBREILA,
Q. Does this only come in the short length?
A. Please refer to the FAQ referenced within my initial response.