[CA] [CA11] AP Selection - Printable Version +- Raymarine forum (http://forum.raymarine.com) +-- Forum: Raymarine Forums (/forumdisplay.php?fid=1) +--- Forum: Product Selection Assistance (/forumdisplay.php?fid=124) +--- Thread: [CA] [CA11] AP Selection (/showthread.php?tid=7536)

[CA11] AP Selection - Gamori - 02-27-19 03:56 AM 26’ Carver Santa Cruz 1986 8’ Beam 260 Merc 5400# + gear Displacement 5,000# 2 station steering Adding a Merc Pro Kicker 15hp I’d like to update the AP to run the kicker via EZ rod solo, while using the main to steer as well. (Uncle Norm’s Orca fin??) I was told there was a conversion done previously and it no longer needed the res tank that should be mounted on the transom. Please forgive my ignorance, I’m used to a 14’ john boat for crappie fishing not trolling a Great Lake for salmon. Old installed AP setup in attached pix. Thanks in advance, Gam. RE: [CA11] AP Selection - Chuck - Raymarine - Moderator - 02-27-19 02:50 PM Welcome to the Raymarine Forum Gamori, As near as I can ascertain from the photo of the steering ram's cable, it appears to be a Teleflex 125-8EM (HC5328). The cubic capacity of this steering ram is 21.25 cu. in. (345 cc). This would typically require a Type 2 Hydraulic Pump. Should the currently installed hydraulic pump be operational, then it may be used with a T70162 EV-400 Power (included EV-1 CCU, ACU-400, p70RS control head, and Evolution Cabling Kit). RE: [CA11] AP Selection - Gamori - 02-28-19 12:31 PM Thank you, sir. -Gam RE: [CA11] AP Selection - Chuck - Raymarine - Moderator - 02-28-19 01:46 PM You're welcome.