+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Networking / System Integration (/forumdisplay.php?fid=21)
+--- Thread: [CA] [CA11] Connecting a SeatalkNG backbone to a NMEA 2000 backbone (/showthread.php?tid=7583)
[CA11] Connecting a SeatalkNG backbone to a NMEA 2000 backbone - JeepSWAG - 03-05-19 03:56 PM
I want to double check that my connections are correct. I have a Seatalk 5-way connector and a separate NMEA 200 backbone that I would like to join together. I know that I can connect the two by using each as a spur connection. In order to keep things a little cleaner I would like to do the following. Join the backbones using a Raymarine A06046 adapter by connecting a Seatalk spur connection to a NMEA 2000 termination connection. I have attached a picture and thanks in advance.
RE: [CA11] Connecting a SeatalkNG backbone to a NMEA 2000 backbone - Chuck - Raymarine - Moderator - 03-06-19 01:57 PM
Welcome to the Raymarine Forum JeepSWAG,
A SeaTalkng to DeviceNet Spur adapter shown within your photo should not be used to join these two backbones to one another. Please click here to view a FAQ addressing how to properly join these two backbones to one another.