+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Fishfinders (/forumdisplay.php?fid=25)
+--- Thread: [CA] [CA11] Can I use a Thru Hull transducer with ths DS500x? (/showthread.php?tid=7595)
[CA11] Can I use a Thru Hull transducer with ths DS500x? - SebinNZ - 03-06-19 10:07 PM
Hi there, I have purchased a second-hand Raymarine DS500X unit with transom mount transducer. Can this unit work with a thru hull transducer? My launch has a thru hull Aymar plastic S200 installed which worked with a Humminbird unit, but the transducer does not seem to work anymore.
Could I retrofit a recent Aymar tranducer in the fitting and connect to my DS500X?
RE: [CA11] Can I use a Thru Hull transducer with ths DS500x? - Chuck - Raymarine - Moderator - 03-07-19 03:34 PM
SebinNZ,
It is certainly possible to use the DS500X with a compatible fishfinder transducer. However, Humminbird transducers would not be compatible / supported for use with the DS400X/500X/600X Fishfinders. The Raymarine's cx7 MFDs, the DS400X/500X/600X Fishfinders may be used with the fishfinder transducers found here.
RE: [CA11] Can I use a Thru Hull transducer with ths DS500x? - SebinNZ - 03-07-19 08:14 PM
Ok, will look into these options. Thank you!
RE: [CA11] Can I use a Thru Hull transducer with ths DS500x? - Chuck - Raymarine - Moderator - 03-08-19 07:25 AM
You're welcome.