[DG] [DG11] Tides depending on chart - Printable Version +- Raymarine forum (http://forum.raymarine.com) +-- Forum: Raymarine Forums (/forumdisplay.php?fid=1) +--- Forum: Multifunction Displays (/forumdisplay.php?fid=120) +--- Thread: [DG] [DG11] Tides depending on chart (/showthread.php?tid=7705) |
[DG11] Tides depending on chart - gungner - 03-20-19 09:24 AM Hi, is there a difference in how tides and currents are displayed depending on chart supplier? I got C-MAP 4DMAX+ and I'm very disappointed with it showing tide and currents. Question, will it look different with Navionics+? I screen dump would be much appreciated . Cheers RE: [DG11] Tides depending on chart - Derek - Raymarine - Moderator - 03-22-19 09:22 AM HI gungner Thank you for your enquiry. the display depends on the chart supplier, I have attached some examples of navionics from the LH3 manual. Regards Derek RE: [DG11] Tides depending on chart - gungner - 03-26-19 11:39 AM Thank you! I bought a navionics card now for the UK and what a difference regarding the display of tides and currents, not at all comparable with c-map. On the other hand, now I need to pay yearly fee getting auto route to work when c-map is a one of cost. You can't get it all and bottom line is the quality provided. cheers, tord RE: [DG11] Tides depending on chart - Derek - Raymarine - Moderator - 03-26-19 12:26 PM Hi Tord, Delighted you have a better outcome, also with Navionics you get the community layer too - might be interesting for you? Regards Derek |