Raymarine forum
[CA] [CA11] Replacing C90W with Axion MFD - Printable Version

+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Networking / System Integration (/forumdisplay.php?fid=21)
+--- Thread: [CA] [CA11] Replacing C90W with Axion MFD (/showthread.php?tid=7713)

[CA11] Replacing C90W with Axion MFD - Limestone45 - 03-21-19 03:38 PM

Replacing cockpit and Nav station C90W with Axiom 7 on Swan 40. Cable conduits are full, and cannot pull Raynet ends through. I can use the existing 14/2 power supplies for the new MFDs. Can I use the existing, good condition, HS cable, and splice in the RayNet cable ends ?

RE: [CA11] Replacing C90W with Axion MFD - Chuck - Raymarine - Moderator - 03-25-19 12:23 PM

Welcome to the Raymarine Forum Limestone45,

Please click here to view a FAQ addressing this subject. The power leads of the Axiom MFD Power/NMEA 2000 Cables may be splice to the currently installed 14-2 power cable which is currently supplying powering the Widescreen MFDs. As indicated within the referenced FAQ, adapter are available to permit the currently installed SeaTalkhs Cable to be re-purposed.