+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [CA] [CA11] Routing Limitations on E90W (/showthread.php?tid=7780)
[CA11] Routing Limitations on E90W - viben - 03-27-19 09:19 PM
Can someone please confirm the routing limitations on the E90W:
1. Maximum number of waypoints per route?
2. Maximum number of waypoints to be stored on the plotter?
3. Maximum number of routes to be stored on the plotter?
4. Maximum number of waypoints per track?
5. Maximum number of tracks to be stored on the plotter?
6. Any other limitations to be aware of?
Thank you!
RE: [CA11] Routing Limitations on E90W - Chuck - Raymarine - Moderator - 03-28-19 03:07 PM
Welcome back to the Raymarine Forum Viben,
The requested information is found within Chapter 5.4 Waypoints, routes and tracks storage capacity of the E-Series Widescreen MFD Reference Manual.
Q1. Maximum number of waypoints per route?
A1. 50
Q2. Maximum number of waypoints to be stored on the plotter?
A2. 3000 waypoints; 100 groups
Q3. Maximum number of routes to be stored on the plotter?
A3. 150
Q4. Maximum number of waypoints per track?
A4. Maximum number of track points per track = 1000; maximum total number of track points within the system is 10,000
Q5. Maximum number of tracks to be stored on the plotter?
A5. 15 tracks
Q6. Any other limitations to be aware of?
A6. The following additional constraints should be heeded with this product
- Waypoint/Route'/Track Name Length: 16 characters (DO NOT USE APOSTROPHE (') OR DOUBLE QUOTE (") CHARACTERS);
- Duplication of waypoint, route, or track names prohibited
- Waypoint comments: 32 characters (DO NOT USE APOSTROPHE (') OR DOUBLE QUOTE (") CHARACTERS)
- Routes: routes must not use the same waypoint for consecutive points within the route
RE: [CA11] Routing Limitations on E90W - viben - 03-29-19 10:43 AM
Thank you, Chuck.
RE: [CA11] Routing Limitations on E90W - Chuck - Raymarine - Moderator - 03-29-19 12:28 PM
You're welcome.