[CA] [CA11] In hull shoot thru xducer for eS78 - Printable Version +- Raymarine forum (http://forum.raymarine.com) +-- Forum: Raymarine Forums (/forumdisplay.php?fid=1) +--- Forum: Fishfinders (/forumdisplay.php?fid=25) +--- Thread: [CA] [CA11] In hull shoot thru xducer for eS78 (/showthread.php?tid=7832) |
[CA11] In hull shoot thru xducer for eS78 - Berettadog - 04-02-19 05:20 PM I recently purchased an eS78 and want to use an in-hull shoot thru transducer. What model transducer would I use and do I need any additional adapter cables?? My hull is not cored, solid glass. Thank You, RE: [CA11] In hull shoot thru xducer for eS78 - Chuck - Raymarine - Moderator - 04-03-19 09:44 AM Welcome to the Raymarine Forum Berettadog, Please click here to view a FAQ addressing this subject. Should a CPT-S transducer not be acceptable, then the following other options may be considered: - for those not seeking fishfinder features and only seeking to add numerical depth information within the system, consider interfacing the MFD to an i70 MFID and a T70278 P79S Smartâ„¢ Transducer to the system - for those seeking to add 50kHz/200kHz fishfinder features to the system, consider interfacing the MFD to a CP370 fishinder sounder module with an E66008 P79 Fishfinder Transducer to the system. For those seeking better 50kHz/200kHz fishfinder performance consider use of an A66089 M260 transducer with the CP370. - for those seeking high power CHIRP sonar features, consider interfacing the MFD to a CP470/CP570 CHIRP Sonar Module with a compatible in-hull CHIRP transducer. |