Raymarine forum
[CA] [CA11] how to convert s3g autoplot to sea talkng - Printable Version

+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Autopilots (/forumdisplay.php?fid=23)
+--- Thread: [CA] [CA11] how to convert s3g autoplot to sea talkng (/showthread.php?tid=7838)



[CA11] how to convert s3g autoplot to sea talkng - kimberlite - 04-03-19 11:17 AM

My S3G supplies power and data to most of my st60+ instruments and autopilot heads.st 6001 and st 7001.
How do I interface this to sea talk NG and my e120 and e80 chart plotters?
Thanks


RE: [CA11] how to convert s3g autoplot to sea talkng - Chuck - Raymarine - Moderator - 04-03-19 01:06 PM

Welcome to the Raymarine Forum kimberlite,

Please click here to view a FAQ addressing this subject. The process should begin with ensuring that the MFD's have been updated with v5.69 E-Series Classic MFD software and if not that the software within the MFDs be updated accordingly. Raymarine offers the A06061 / 4.92in (1.5m) Adapter Cable to permit the Data Master MFD to be interfaced to a spur socket within the backbone via the MFD's SeaTalk2/NMEA 2000 socket.