+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Networking / System Integration (/forumdisplay.php?fid=21)
+--- Thread: [CA] [CA11] eS98 to networking switch (/showthread.php?tid=7929)
[CA11] eS98 to networking switch - Seahorse - 04-14-19 07:26 PM
This winter I added a Backbone and Networking switch. I'm having difficulty connecting the switch to my eS98. What cable is used from the switch and where on the back of the eS do I connect?
RE: [CA11] eS98 to networking switch - Chuck - Raymarine - Moderator - 04-17-19 03:56 PM
Welcome to the Raymarine Forum Seahorse,
What model of network switch did you install?
RE: [CA11] eS98 to networking switch - Seahorse - 04-19-19 05:45 PM
HS5. The book says to use a e series A06061. It does not plug into anything I own.
What did I order wrong
RE: [CA11] eS98 to networking switch - Chuck - Raymarine - Moderator - 04-22-19 12:48 PM
Seahorse,
The A06061 E-Series to Seatalk Adapter Cable is designed to support interfacing an E-Series Classic MFD's (E80, E120) SeaTalk2/NMEA 2000 port to a spur socket within a system's powered and properly terminated SeaTalkng / NMEA 2000 backbone ... this adapter is not applicable to eS-Series MFDs. Instead, an appropriate length of RayNet (F) to RayNet (F) Cable would be used to interface one of the Ethernet Network sockets of the eS-Series MFD to one of the Ethernet Network sockets of the HS5 RayNet Network Switch.