+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Networking / System Integration (/forumdisplay.php?fid=21)
+--- Thread: [CA] [CA11] Interfacing RL70C plus hsb2 2002 system to NMEA0183 GPS receiver (/showthread.php?tid=7971)
[CA11] Interfacing RL70C plus hsb2 2002 system to NMEA0183 GPS receiver - [email protected] - 04-19-19 03:27 PM
I have a 120 Raymarine GPS connected to a 2002 Raymarine system including a RL70c plus hsb2 chartplotter, 150 course computer, fluxgate compass, RC 530 radar display, and Raymarine auto pilot. I want to remove the 120 GPS and replace it with a NMEA0183 GPS receiver. Any help with a wiring diagram or suggestions would be helpful.
Thanks in advance,
George Miller
RE: [CA11] Interfacing RL70C plus hsb2 2002 system to NMEA0183 GPS receiver - Chuck - Raymarine - Moderator - 04-23-19 10:14 AM
Welcome to the Raymarine Forum George,
When interfacing a third party GPS sensor supporting 4800 BAUD NMEA 0183 v2.1 or greater communications protocol to a hsb/hsb2/SL Pathfinder Series Chartplotter, Radar, or Fishfinder display,
- connect the NMEA 0183 IN1+ (green) lead of the display's Power/NMEA 0183 Input Cable to the GPS sensor's NMEA 0183 OUT+ lead
- connect the NMEA 0183 IN1- (blue) lead of the display's Power/NMEA 0183 Input Cable to the GPS sensor's NMEA 0183 OUT- lead
- connect the NMEA 0183 GPS sensor's power and ground leads to a switched power circuit and to ground as directed by the GPS sensor's manufacturer.
Alternatively, please click here to view a FAQ addressing how a Raystar 150 GPS Sensor may be interfaced to a hsb/hsb2/SL Pathfinder Series Chartplotter, Radar, or Fishfinder display.