+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Autopilots (/forumdisplay.php?fid=23)
+--- Thread: [DG] [DG11] Ev1 sensor core Cable (/showthread.php?tid=7995)
[DG11] Ev1 sensor core Cable - Hotdog7 - 04-22-19 06:31 PM
Can I use blue backbone cable going from 5 way block to the t piece then connect white spur cable from the piece to ev1 sensor core? Or do I have to run spur cable from 5 way block to ev1 sensor core?
RE: [DG11] Ev1 sensor core Cable - Derek - Raymarine - Moderator - 04-23-19 10:57 AM
Hi HotDog7
Thank you for your enquiry.
The suggestion you have made is correct, remove the blue terminator from the 5 way block, plug a new backbone cable in to that blue socket and then use a T piece at the end, refit the blue terminator into the empty blue socket in the T piece and then use a spur cable to the EV1.
Thanks
Derek