+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Fishfinders (/forumdisplay.php?fid=25)
+--- Thread: [CA] [CA11] 2nd transducer with the axiom 9 (/showthread.php?tid=8019)
[CA11] 2nd transducer with the axiom 9 - Gnj5 - 04-23-19 08:59 PM
Hi Guys, I just recently installed s new axiom 9 on my seacraft. I m using the RV 100. Like others I’m not able to hold bottom over 8knts. What is everyone running for a secondary 50/200 transom mount transducer? Any suggestions would be greatly appreciated.
RE: [CA11] 2nd transducer with the axiom 9 - Chuck - Raymarine - Moderator - 04-25-19 02:49 PM
Welcome to the Raymarine Forum Gnj5,
If seeking a transom mounted transducer would typically be recommended that either the A102138 P58 or E66054 P66 transducers be used for such purposes. For those having solid fiberglass hulls no thicker than 5/8" who may be seeking an in-hull transducer for such purposes, the E66073 P74 or the E66008 P79 transducers are often used for such purposes. If selecting the P58 or P74 transducer, then the A80491 Y-Cable would be used. Alternatively, if selecting the P66 or P79 transducer, hen the A80492 Y-Cable would be used.
RE: [CA11] 2nd transducer with the axiom 9 - Gnj5 - 04-25-19 04:50 PM
Chuck, Thanks for the response. I think I’ll give the P66 a shot.
RE: [CA11] 2nd transducer with the axiom 9 - Chuck - Raymarine - Moderator - 04-26-19 08:23 AM
You're welcome.