+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [LW] [LW11] Axiom 7 Display Angle (/showthread.php?tid=8064)
[LW11] Axiom 7 Display Angle - Breeze - 04-29-19 08:55 AM
Hi,
We recently purchased an axiom 7 mounted this so that they can view the Axiom well from the tiller Area. Mounted somewhat forward, to get best view angle. We are using the internal GPS receiver. The problem is the axiom gives a error in COG from exactly 180°. Is it possible to correct this in the software somewhere ?
Thanks in Advance!
Enzio
RE: [LW11] Axiom 7 Display Angle - Louise - Raymarine - Moderator - 04-30-19 09:58 AM
Dear Breeze,
Thank you for your query.
COG comes from your GPS when underway, is this the case? There are no settings for COG. Are you underway when this happens?
Are you sure it is not your heading that is 180' out?
Many Thanks
Louise
RE: [LW11] Axiom 7 Display Angle - Breeze - 05-29-19 12:06 AM
Last weekend i tested al the way arround, its now fine. I dont know it was fixed with last update or it was just an accident. Do i need heading data for laylines? I have only GPS onboard. Laylines won’t appears. Last operation manuals says:
•thefollowingdatamustbepresentontheMFDnetwork:
–Wind
–SpeedThroughWater STW
–GPS
I meet the requirements and i have already did startup factory reset
Thanks in advance