Raymarine forum
[CA] [CA11] Size replacement for C80 - Printable Version

+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [CA] [CA11] Size replacement for C80 (/showthread.php?tid=8100)



[CA11] Size replacement for C80 - unixdood - 05-01-19 12:42 PM

Hi,
My buddy has a C80 mounted IN dash (Flush) of his Mainship M/Y. he is looking at upgrading to a new MFD. is there any Raymarine MFD's that would fit into the same mounting area that the C80 is currently in?
Thanks


RE: [CA11] Size replacement for C80 - Chuck - Raymarine - Moderator - 05-01-19 02:36 PM

Welcome back to the Raymarine Forum unixdood,

It would typically be recommended that an Axiom 9 or Axiom 9RV MFD be considered as a replacement for C80 MFD. The installation template these MFDs (also includes dimensional data for the MFD's cutout and footprint) may be found here. Raymarine also now offers the A80564 C80/E80 to Axiom 9 Adapter Plate. Please additionally click here to view a FAQ addressing replacement of a C-Series Classic MFD with an Axiom MFD.


RE: [CA11] Size replacement for C80 - unixdood - 07-09-19 05:41 AM

Thanks for the reply! Ill grab that setup then!


RE: [CA11] Size replacement for C80 - Chuck - Raymarine - Moderator - 07-15-19 06:00 PM

You're welcome.