+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Fishfinders (/forumdisplay.php?fid=25)
+--- Thread: [CA] [CA11] Adapter for CP300 and B164 Transducer (/showthread.php?tid=8125)
[CA11] Adapter for CP300 and B164 Transducer - CoryB - 05-03-19 02:42 PM
I have a new-to-me E-125 MFD and CP300 digital sonar module. My B164 transducer does not connect directly into the CP300. I need an adapter cable and cannot get the right part number. Can you please advise.
Thank you
RE: [CA11] Adapter for CP300 and B164 Transducer - Chuck - Raymarine - Moderator - 05-06-19 02:59 PM
Welcome to the Raymarine Forum Cory,
As indicated within the FAQ found here, the product name B164 identifies a family of transducers rather than a single transducer, each of which is designed for a specific manufacturer and fishfinder or instrument product offered by that manufacturer. As such, the transducer's product ID(s) should be used in determining compatibility of the transducer with Raymarine's fishfinding products. If supplied with a photo of the transducer's tag which clearly shows all information printed on it, then we may be able to advise you on an adapter.
RE: [CA11] Adapter for CP300 and B164 Transducer - CoryB - 06-12-19 11:37 PM
Will do, Chuck. Sorry about the double post. I wasn't notified that this was responded to. Just made sure my subscription was correct this time
RE: [CA11] Adapter for CP300 and B164 Transducer - Chuck - Raymarine - Moderator - 06-13-19 08:05 AM
You're welcome.