+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [CA] [CA11] LH3.9 upgrade no sailing settings (/showthread.php?tid=8128)
[CA11] LH3.9 upgrade no sailing settings - heysteve - 05-04-19 12:17 PM
I just updated my Axiom Pro to LH3.9 (from 3.8) and do not see the new sailing settings under Settings->Boat Details. My boat type is Sail Cruiser. I tried setting to Powerboat then back to Sail Cruiser but no change.
Any suggestions?
RE: [CA11] LH3.9 upgrade no sailing settings - Chuck - Raymarine - Moderator - 05-10-19 12:25 PM
Welcome to the Raymarine Forum Steve,
It is recommended that your system's waypoints, routes, and tracks be exported to a microSD memory card, that Factory Reset (HOME->SETTINGS->THIS DISPLAY->FACTORY RESET) be commanded to address this issue. Setting the boat type to one of the sailing boat types listed should then permit a Laylines tab to be displayed within the Chart application's settings (MENU->SETTINGS).
RE: [CA11] LH3.9 upgrade no sailing settings - heysteve - 05-15-19 07:55 AM
This worked, thanks.
RE: [CA11] LH3.9 upgrade no sailing settings - Chuck - Raymarine - Moderator - 05-15-19 07:57 AM
You're welcome.