+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [CA] [CA11] copying routes/waypoints from Axion Pro to a97 (/showthread.php?tid=8181)
[CA11] copying routes/waypoints from Axion Pro to a97 - morowsky - 05-09-19 06:09 AM
I have recently installed an Axiom Pro 9 system and have been busy creating routes and waypoints.
A boating buddy has an a97 system that he has not created any routes on.
Can I simply backup my routes and waypoints and restore them on his system to get him started?
Thank you
RE: [CA11] copying routes/waypoints from Axion Pro to a97 - Chuck - Raymarine - Moderator - 05-09-19 04:22 PM
Welcome to the Raymarine Forum morowsky,
If running LightHouse 3 v3.8.105 in your MFD and LightHouse II v19.06 in the a-Series MFD, then it task should be as simple as exporting the data from your MFD to a microSD memory card, placing that microSD memory card into the a-Series MFD, and then commanding the a-Series MFD to import the waypoints and routes stored on the microSD memory card. If the Axiom Pro MFD is running LightHouse 3 v3.9.46, then you will want to verify that none of the waypoint names or route names longer than 16 characters. Please click here to view a FAQ addressing this subject.
RE: [CA11] copying routes/waypoints from Axion Pro to a97 - morowsky - 05-10-19 10:52 AM
Thank you for the guidance.
Steve
RE: [CA11] copying routes/waypoints from Axion Pro to a97 - Chuck - Raymarine - Moderator - 05-10-19 12:50 PM
You're welcome.