+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: General Discussions (/forumdisplay.php?fid=2)
+--- Thread: [CA] [CA11] C80 to Axiom 9" adaptor (/showthread.php?tid=8190)
[CA11] C80 to Axiom 9" adaptor - Rom - 05-09-19 03:32 PM
Hi all,
Does an adaptor template exist to mount an Axiom 9" where a C80 used to be?
I cannot find it on the website.
Many thanks,
Rom
RE: [CA11] C80 to Axiom 9" adaptor - Chuck - Raymarine - Moderator - 05-09-19 04:25 PM
Welcome to the Raymarine Forum Rom,
It would typically be recommended that an Axiom 9 or Axiom 9RV MFD be considered as a replacement for a C80 MFD or E80 MFD. The installation template these MFDs (also includes dimensional data for the MFD's cutout and footprint) may be found here. Raymarine also now offers the A80564 C80/E80 to Axiom 9 Adapter Plate. Please additionally click here to view a FAQ addressing replacement of a C-Series Classic MFD with an Axiom MFD.
RE: [CA11] C80 to Axiom 9" adaptor - Rom - 05-10-19 02:34 PM
Hi Chuck,
Thanks for the answer, very informative.
Thanks,
Rom
RE: [CA11] C80 to Axiom 9" adaptor - Chuck - Raymarine - Moderator - 05-10-19 03:51 PM
You're welcome.