+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [CA] [CA11] E120 Fuse Sizing (/showthread.php?tid=8222)
[CA11] E120 Fuse Sizing - tdrichards - 05-13-19 01:22 PM
I bought a used E120 system complete with manuals and am having a hard time determining the proper fuse sizing for the different components. I have an E120 with a RD216 attached to it, a DSM300 and a Seatalk high speed switch. Also, I can't find a manual for the DSM300 in your support section? Thanks - Terry
RE: [CA11] E120 Fuse Sizing - Chuck - Raymarine - Moderator - 05-13-19 02:52 PM
Welcome to the Raymarine Forum Terry,
When interfaced to a 2kW radome, the E120's circuit should be protected with 15A fuse or 10A breaker. The DSM300's circuit should be protected with an 8A fuse or 10A breaker. The SeaTalkhs Network Switch's circuit should be protected with a 2A fuse. Please note that there are two pages of Retired Fishfinder Manuals and that the DSM30/300's Manual is located on the second page (2 of 2).