+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [CA] [CA11] E120 Classic REBOOTING (/showthread.php?tid=8251)
[CA11] E120 Classic REBOOTING - Fraydnot - 05-16-19 05:45 AM
Hello and good morning. I have a E120 Classic that every 7 minutes. I have verified none of the soft keys are stuck. When it reboots on my screen setup page I can set the different pages for what I want. But after every reboot all information is lost expect the factory preset screens.
I thought it might be power issue but I just installed to new batteries and it does it with either engines running or not???!!!!
Any help would be outstanding.Thanks
Mike
RE: [CA11] E120 Classic REBOOTING - Chuck - Raymarine - Moderator - 05-16-19 09:57 AM
Welcome to the Raymarine Forum Mike,
It is recommended that you verify that the MFD has been updated with the final E-Series Classic MFD software update (v5.69) and if not, that its software be updated accordingly. Should the MFD have been updated and should the reported issue persist, then it is recommended that a Factory Reset be commanded. Please click here to view a FAQ addressing this subject. The MFD should then be tested without a chart card in its reader to verify the operational state of the MFD.