+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [CA] [CA11] UAV with Axiom (/showthread.php?tid=8307)
[CA11] UAV with Axiom - engenharia2 - 05-21-19 02:38 PM
Hi,
I have a doubt about the conection between the MFD and the remote control of my drone, The model is the DJI MAVIC PRO, if I conect the card reader on the MFD, Can I use the card reader as a extension? Can I use the USB port to conect the cable of my remote control with Axiom XL?
Thanks in advance.
Felipe
RE: [CA11] UAV with Axiom - Chuck - Raymarine - Moderator - 05-23-19 03:48 PM
Welcome to the Raymarine Forum Felipe,
Q1. if I conect the card reader on the MFD, Can I use the card reader as a extension?
A1. Negative. The UAV remote's USB cable must be plugged directly into the MFD's USB port. Raymarine is presently considering introduction of a USB extension which would terminate in a bulkhead jack (only for use with the UAV remote).
Q2. Can I use the USB port to conect the cable of my remote control with Axiom XL?
A2. Negative.
RE: [CA11] UAV with Axiom - engenharia2 - 05-24-19 07:44 AM
In that case we have 4 Axiom XL and it's really hard open the panel all the time to connect the USB cable, Have you ever seen something to solve this problem?
RE: [CA11] UAV with Axiom - Chuck - Raymarine - Moderator - 05-24-19 08:23 AM
Felipe,
Q. Have you ever seen something to solve this limitation?
A. Until such time as Raymarine introduces an extension, only option would be to leave the UAV remote's USB cable connected to the USB port of one of the MFDs.
RE: [CA11] UAV with Axiom - mattsteg - 05-24-19 09:21 PM
Maybe try something like this?
https://www.amazon.com/Connectors-Connector-Waterproof-Micro-USB-Extension/dp/B07KGD2G3P
RE: [CA11] UAV with Axiom - Chuck - Raymarine - Moderator - 05-28-19 10:24 AM
Noted.