+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Networking / System Integration (/forumdisplay.php?fid=21)
+--- Thread: [CA] [CA11] AR200 connection (/showthread.php?tid=8308)
[CA11] AR200 connection - engenharia2 - 05-21-19 03:07 PM
Hi,
I have a doubt Clear Cruise, I could not find any information if is possible connect the AR200 sensor on the Inline terminator to connect on my 5way connector? I have a problem with the distance between the AR200 and my 5way connector.
RE: [CA11] AR200 connection - Chuck - Raymarine - Moderator - 05-23-19 03:50 PM
Welcome to the Raymarine Forum Felipe,
Q. I could not find any information if is possible connect the AR200 sensor on the Inline terminator to connect on my 5way connector?
A. It is indeed possible to do so with any product featuring a SeaTalkng or NMEA 2000 communications interface.
RE: [CA11] AR200 connection - engenharia2 - 05-24-19 07:21 AM
Chuck,
thank you.
RE: [CA11] AR200 connection - Chuck - Raymarine - Moderator - 05-24-19 07:34 AM
You're welcome.