+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Instruments (/forumdisplay.php?fid=117)
+--- Thread: [DG] [DG11] Testing ST60 Wind Instrument (/showthread.php?tid=8339)
[DG11] Testing ST60 Wind Instrument - gam50265 - 05-24-19 03:39 PM
I have a ST-60 long arm forward wind transducer that is not currently mounted. Before removal it was not working (no wind readings were being displayed). I had it removed from my masthead for testing, since I wanted to isolate whether the problem was with the AWI, the cable to the masthead, or further along the path.
I found the write up for testing the wind instrument while mounted. Is there any way to test the AWI while not mounted?
Thanks, Glenn
RE: [DG11] Testing ST60 Wind Instrument - Derek - Raymarine - Moderator - 06-03-19 08:53 AM
Hi Glenn,
Thankyou for your enquiry.
By AWI are you referring to the wind display itself or the masthead transducer?
If the wind instrument, then no, there is not a specific test to check the display responds to the inputs from the transducer.
the masthead tests can be found at this link or here .
best regards
Derek