[LW] [LW11] Axiom powering up on its own. - Printable Version +- Raymarine forum (http://forum.raymarine.com) +-- Forum: Raymarine Forums (/forumdisplay.php?fid=1) +--- Forum: Multifunction Displays (/forumdisplay.php?fid=120) +--- Thread: [LW] [LW11] Axiom powering up on its own. (/showthread.php?tid=8348) |
[LW11] Axiom powering up on its own. - Rookie Fisherman - 05-25-19 09:03 PM Hello again, One of my Axioms is powering up on its own. At the end of the day I of course power down all the electronics. Come back to the boat the next day and the DM is powered on. This has happened a couple of times over the last week. Can you shed any light on this issue? Thank you RE: [LW11] Axiom powering up on its own. - Louise - Raymarine - Moderator - 05-31-19 10:37 AM Dear Rookie Fisherman, Thank you for your query. Is is an Axiom touchscreen you have? What version of software are you running? If it is lower than LH3.9 Annapolis, please update them. Do you not turn the power breaker off when not onboard? Do you leave a power supply to the electronics? Many Thanks Louise RE: [LW11] Axiom powering up on its own. - Rookie Fisherman - 06-03-19 12:56 PM Thank you for the response. Questions answered below. Yes touch screen. Just performed the update so we will see if the issue is resolved. No I do not turn off the breaker, no reason to as the small amount of draw is not an issue when boat is plugged into shore power. Thx RE: [LW11] Axiom powering up on its own. - Louise - Raymarine - Moderator - 06-05-19 05:46 AM Dear Rookie Fisherman, Let me know the outcome of the Software update. Regards Louise |