+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [CA] [CA11] Lighthouse 3.9 - Waypoint Arrival Radius (/showthread.php?tid=8383)
[CA11] Lighthouse 3.9 - Waypoint Arrival Radius - BobMack - 05-28-19 04:36 PM
Looking in manual for procedures for adjusting the Waypoint Arrival Radius.
I past software this allowed a route to maintain a reduced radius then implementing a turn during a route. I have not adjusted my new lighthouse 3.9 and some turns end up starting way too soon when working within narrow channels.
RE: [CA11] Lighthouse 3.9 - Waypoint Arrival Radius - Chuck - Raymarine - Moderator - 06-03-19 04:15 PM
Welcome to the Raymarine Forum Bob,
Waypoint arrival has always been associated within an alarm within Raymarine systems. The waypoint arrival radius is configured within the LightHouse 3 Alarms settings (HOME->ALARMS->SETTINGS->ARRIVAL RADIUS).