+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Product and Feature Suggestions (/forumdisplay.php?fid=128)
+--- Thread: [CA] [CA11] Continous Range and Bearing to Cursor, Axiom (/showthread.php?tid=8412)
[CA11] Continous Range and Bearing to Cursor, Axiom - carlmk - 05-31-19 05:18 AM
In an Axiom Pro or Axiom 9, Is there a mode where the range and bearing is continuously displayed on the chart as the cursor is moved around away from the boat?
My old E120 has this feature and it was very useful in navigating and planning. Cannot find it on my Axioms.
RE: [CA11] Continous Range and Bearing to Cursor, Axiom - Chuck - Raymarine - Moderator - 06-03-19 04:45 PM
Welcome back to the Raymarine Forum Carl,
The feature which you have inquired about was referred to as the Cursor Range and Bearing data item within MFDs running LightHouse II software. This feature has not yet been included within a LightHouse 3 software update, but has been logged accordingly for consideration to be included within an updated.
Please click here more information concerning product and feature suggestions.