+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Radar (/forumdisplay.php?fid=125)
+--- Thread: [DG] [DG11] Quantum2 Side mount on the mast (/showthread.php?tid=8465)
[DG11] Quantum2 Side mount on the mast - miles.woodhouse@gmail.com - 06-05-19 08:08 AM
I have a quantum 2 but a mast configuration that does not allow me to mount it for and aft. Am I able to mount it on the side of the mast?
RE: [DG11] Quantum2 Side mount on the mast - Derek - Raymarine - Moderator - 06-05-19 10:21 AM
Hi Miles,
Thank you for your enquiry.
The Quantum two can be fitted to the side of a mast, using an AXIOM display, you will need to adjust the BEARING ALIGNMENT so that the targets on the radar correctly appear oriented, you will of course have a blind sector on the side where the mast is located, you can mask this affected sector to eliminate echo returns from the mast too. These two features are both in the current software version 3.9 of AXIOM.
Regards
Derek