ST60 Wind Display - Printable Version +- Raymarine forum (http://forum.raymarine.com) +-- Forum: Raymarine Forums (/forumdisplay.php?fid=1) +--- Forum: Instruments (/forumdisplay.php?fid=117) +--- Thread: ST60 Wind Display (/showthread.php?tid=850) |
ST60 Wind Display - navyguy28 - 05-17-16 10:02 PM Purchased this unit used (in Box) a couple of years ago, it was opened but never installed. When I finally installed the control head to my network via seatalk, as well as connecting all the cables as per the manual, the unit display is making a loud buzzing noise. None of the keys work nor do the back lights, the wind direction needle does not move and the wind speed indicator is blank. I am having a hard time finding a replacement display. could this be a 12 volt power supply issue? thanks in advance RE: ST60 Wind Display - Steve - Raymarine - Moderator - 05-18-16 12:33 PM First, do you have the masthead transducer connected directly to the ST60 Wind display? It could be a voltage issue, if you measure the Red and Gray on Seatalk you should be seeing 12+ VDC. |