+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [LW] [LW11] eS 128 - NMEA2000 fuel consumption. How to display liter/nm? (/showthread.php?tid=8552)
[LW11] eS 128 - NMEA2000 fuel consumption. How to display liter/nm? - mmosberg - 06-12-19 08:16 AM
Hello from Norway :-)
I have a MFD eS 128 in my boat. There are 2x Volvo Penta KAD300 engines in the boat and I have successfully installed one YDES04 J1708 gateway pr engine, attached them to the backbone and displays the live engine data on my eS 128. See attached picture.
Is there a way to make the eS 128 calculate consumption and present it as liter/nm?
RE: [LW11] eS 128 - NMEA2000 fuel consumption. How to display liter/nm? - Louise - Raymarine - Moderator - 06-20-19 05:52 AM
Dear mmosberg,
Thank you for your query.
The eS128 can show fuel used by the following means using the PGN127497;
-distance per volume
-volume per distance
-litres per 100km
For full information and instruction on setting this up, please refer to Chapter 11.1 on P122 of the Lighthouse 2 maunual, this is available to download here.
Many Thanks
Louse
RE: [LW11] eS 128 - NMEA2000 fuel consumption. How to display liter/nm? - mmosberg - 06-20-19 02:49 PM
Thanks a ton
RE: [LW11] eS 128 - NMEA2000 fuel consumption. How to display liter/nm? - Louise - Raymarine - Moderator - 06-21-19 02:52 AM
You are welcome.