+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Multifunction Displays (/forumdisplay.php?fid=120)
+--- Thread: [CA] [CA11] Adding Boundary Lines to an E120 Chart Plotter (/showthread.php?tid=8555)
[CA11] Adding Boundary Lines to an E120 Chart Plotter - tdrichards - 06-12-19 12:21 PM
I am wondering what is the best way to add boundary lines to an E120 chart plotter? What I need to add are "No Fishing" boundaries between two or more waypoints and I would like them permanently displayed. I looked at using a track but am not sure if this is the best method.
RE: [CA11] Adding Boundary Lines to an E120 Chart Plotter - Chuck - Raymarine - Moderator - 06-12-19 02:04 PM
Welcome to the Raymarine Forum tdrichards,
I would typically recommend that routes be created for such purposes. Routes feature waypoints connected by leg lines. Such routes, whose waypoints include the corners of the restricted area, may be shown or hidden to meet your needs.
RE: [CA11] Adding Boundary Lines to an E120 Chart Plotter - tdrichards - 06-12-19 03:57 PM
Can you have multiple routes displayed at the same time?
RE: [CA11] Adding Boundary Lines to an E120 Chart Plotter - Chuck - Raymarine - Moderator - 06-13-19 09:22 AM
tdrichards,
Q. Can you have multiple routes displayed at the same time?
A. Yes.
RE: [CA11] Adding Boundary Lines to an E120 Chart Plotter - tdrichards - 06-18-19 12:49 PM
Thanks for your help.
RE: [CA11] Adding Boundary Lines to an E120 Chart Plotter - Chuck - Raymarine - Moderator - 06-18-19 01:40 PM
You're welcome.