+- Raymarine forum (http://forum.raymarine.com)
+-- Forum: Raymarine Forums (/forumdisplay.php?fid=1)
+--- Forum: Instruments (/forumdisplay.php?fid=117)
+--- Thread: [CA] [CA11] MICRO TALK COMPATIBILITY (/showthread.php?tid=8612)
[CA11] MICRO TALK COMPATIBILITY - ALEX64 - 06-18-19 12:49 PM
Hi,
Could Micro Talk E 70361 interface at the same time instruments on Micronet MN01 1 and MN0 2?
Alex
RE: [CA11] MICRO TALK COMPATIBILITY - Chuck - Raymarine - Moderator - 06-21-19 12:09 PM
Welcome the Raymarine Forum Alex,
In short, the answer is yes. Additionally, I believe that you may have meant to reference the MN100 and MN100-2.
RE: [CA11] MICRO TALK COMPATIBILITY - ALEX64 - 06-28-19 07:26 AM
The T111 Dual Digital Display (MicroNet 01) is labelled MN30,
the Hull is MN100.
Is Micro Talk working both with MN30 and MN100?
Regards
RE: [CA11] MICRO TALK COMPATIBILITY - Chuck - Raymarine - Moderator - 07-01-19 12:47 PM
Yes.
RE: [CA11] MICRO TALK COMPATIBILITY - ALEX64 - 07-03-19 02:34 AM
In addition, could the new series AXIOM display MN30 and MN100 data?
RE: [CA11] MICRO TALK COMPATIBILITY - Chuck - Raymarine - Moderator - 07-03-19 10:12 AM
Alex,
Yes. The MicroTalk will indeed bridge data from the TackTick system (ex. wind, depth/speed/temp, GPS, etc.) to a system's powered and properly terminated SeaTalkng / NMEA 2000 backbone. Should a compatible MFD (a/c/e/eS/gS-Series MFD, Axiom/Axiom Pro/Axiom XL MFD, etc.) also be interfaced to the backbone, then data from the TackTick system may be displayed on the MFD.